XBuds TWS Wireless Earbuds XM201 Fenner Tech White

 XBUDS Wireless In-Ear Earphones

Touch control buttons

BT Version: 5.3 + ENC

Input Power: 5V ⎓ 1A

Charging case battery: 250mAh Li-polymer

Earphones battery: 30mAh x 2 Li-polymer

Frequency: 20HZ-20KHZ

Sensitivity: 100 ± 3dB

Impedance: 32Ω

Operating distance: ≥15m

Speaker: 13mm

Power On

After removing the XBUDS from the charging case, they will turn on automatically and emit a sound. The earphone LED will flash.

After the first connection, the XBUDS will connect automatically and you will be able to listen to music or communicate using one or both earphones. You can also turn on the earphones by pressing the multifunction touch button for 3 seconds until you hear the acoustic alert.

Power Off

There are two ways to turn them off:

• Place them in the charging case and they will turn off and enter charging mode automatically.
• Press the function button on one of the earphones for 5 seconds to turn it off. An acoustic alert will notify you that the operation has been performed.

BT Connection

After pairing the 2 earphones, enter the Bluetooth search on your smartphone/tablet and select the device named “FN-XM201” from the list. An alert message will notify you when the earphones are connected.

Some devices may require you to enter the password “0000” to complete pairing. 

N.B.: After the initial connection, the earphones will connect automatically to the smartphone/tablet (with earphones turned off, Bluetooth disabled, or device pairing deleted, the earphones will not connect automatically)

Touch button functions on earphones

• Play / Pause music: during music playback, press any earphone function button once to pause / play the music.
• Play previous track / Play track from the beginning: during music playback, press the multifunction touch button of the left earphone twice to play the track from the beginning. Press the multifunction touch button of the left earphone twice again to play the previous track.
• Play next track: during music playback, press the multifunction touch button of the right earphone twice to skip to the next track.
• Music volume adjustment: During a call or media playback, press the right button three times to increase the volume. During a call or media playback, press the left button three times to decrease the volume. 
• Answer call: when a call arrives, press the multifunction touch button of any earphone once to answer.
• Reject call: when a call arrives, press the multifunction touch button of any earphone twice to reject the incoming call.
• End call: during a call, press the multifunction touch button of any earphone once to end the call.
• Voice assistant activation: press the multifunction button on any earphone 3 times to activate the voice assistant.  
• Change mode: by holding down on the right earphone for two seconds, you can switch from music mode to gaming mode and vice versa.

Charging

• Charging the charging box | Power bank: connect the supplied charging cable to the charging box and a power adapter (not included). During charging, the LED will flash. When charging is complete, the LED will stop flashing.
• Charging the earphones: an acoustic signal will notify you of low battery. Place the earphones in the charging case. During charging, the earphone LED will be on. When they are fully charged, the earphone LED will turn off.