XBuds TWS Wireless Earbuds XM201 Fenner Tech Green

 XBUDS Wireless In-Ear Headphones

Touch control buttons

BT Version: 5.3 + ENC

Input Power: 5V ⎓ 1A

Charging case battery: 250mAh Li-polymer

Earbuds battery: 30mAh x 2 Li-polymer

Frequency: 20HZ-20KHZ

Sensitivity: 100 ± 3dB

Impedance: 32Ω

Operating distance: ≥15m

Speaker: 13mm

Power On

After removing the XBUDS from the charging case, they will turn on automatically and emit a sound. The earbud LED will flash.

After the first connection, the XBUDS will connect automatically and you will be able to listen to music or communicate using one or both earbuds. You can also turn on the headphones by pressing the multifunction touch button for 3 seconds until you hear the sound prompt.

Power Off

There are two ways to turn them off:

• Place them in the charging case and they will turn off and enter charging mode automatically.
• Press the function button on one of the earbuds for 5 seconds to turn it off. A sound prompt will notify you that the operation is complete.

BT Connection

After pairing the 2 earbuds, go to the Bluetooth search on your smartphone/tablet and select the device named “FN-XM201” from the list. A prompt will alert you when the earbuds are connected.

Some devices may require you to enter the password “ 0000 ” to complete the pairing. 

Note: After the first connection, the earbuds will connect automatically to the smartphone/tablet (If the earbuds are off, Bluetooth is disabled, or the device pairing has been deleted, the earbuds will not connect automatically)

Earbud touch button functions

• Play / Pause music: during music playback, press any earbud function button once to pause / play the music.
• Play previous track / Play track from beginning: during music playback, double-press the left earbud multifunction touch button to play the track from the beginning. Double-press the left earbud multifunction touch button again to play the previous track.
• Play next track: during music playback, double-press the right earbud multifunction touch button to skip to the next track.
• Adjust music volume: During a call or media playback, press the right button three times to increase the volume. During a call or media playback, press the left button three times to decrease the volume. 
• Answer call: when a call comes in, press the multifunction touch button on either earbud once to answer.
• Reject call: when a call comes in, double-press the multifunction touch button on either earbud to reject the incoming call.
• End call: during a call, press the multifunction touch button on either earbud once to end the call.
• Activate voice assistant: press the multifunction button on either earbud 3 times to activate the voice assistant.  
• Change mode: by holding down on the right earbud for two seconds, you can switch from music mode to gaming mode and vice versa.

Charging

• Charging the charging case | Power bank: connect the included charging cable to the charging case and the power adapter (not included). During charging, the LED will flash. When charging is complete, the LED will stop flashing.
• Charging the earbuds: an acoustic signal will notify you of low battery. Place the earbuds in the charging case. During charging, the earbud LED will be lit. When they are fully charged, the earbud LED will turn off.